tilt an dslide balcony door.jpg

Tilt and Slide Doors

Tight locking and plenty of light

Unique home ambiance

The tilt-slide doors are an excellent solution for optimized use of space within patio and garden exits.

The tilting and sliding mechanism and the special fittings make it possible to tilt and slide a door leaf that is

as much as 1.6 m wide, using only a small force.


The functionality of the structure provides space savings and the large surface area of the glazing fills the room with light and gives it a unique ambiance.

tilt-slide doors.png


Thanks to the best heat insulation values even in the standard versions, superb workmanship and innovative technical solutions.

Top heat insulation values

Even the standard version of the new lift-slide door with standard stiffening elements and no additional measures achieves a very good calculated heat insulation value of Uf 1.3 W/(m²·K).

Triple glazing

Modern triple glazing up to a thickness of 52 mm (STV® 54 mm) can be used with ease in the new system.


Featuring a modern design, narrow sash and innovative glazing profile for more glass in the fixed section.


Our windows are a combination of excellent performance and pioneering energy efficiency solutions.


A window should be a decorative element and should determine the climate of the interior space. We focus on design, aesthetics, and precise production because the little details determine the overall effect.


Each element of our windows comes with a several years long warranty because we are confident of their high quality.


When you are not at home, you do not need to worry about your property and the security of your family. Our windows are among the most secure windows available in the market!

Types of Tilt-slide doors

tilt slide 1.jpg
tilt slide 2.jpg
tilt slide 3.jpg
tilt slide 4.jpg
tilt slide 5.jpg
tilt slide 6.jpg

Low-E glass

Low-E glass refers to glass with a low-emissivity coating applied on one surface. It is designed to reflect long-wave infrared (heat) back into a building to improve the u-value and energy efficiency of the glazing. Low-E glass is relatively neutral in appearance, so is widely used in both commercial and residential buildings.

Safety glass (laminated/tempered)

It is obtained by joining two or more float glass sheets (clear, reflective or colored) with one or more layers of polyvinyl butyral (PVB) of 0.83 mm thick. If the glass breaks, the pieces remain stuck to the foil, reducing the risk of cutting.

Glass 4 Seasons

Glass 4 Seasons with solar control, retains the low-e glass features, but has a higher degree of protection against sunlight from the outside to the inside. It is the right choice when it comes to removing the greenhouse effect from homes due to the natural energy input from the sun and additionally offers additional noise protection. This can reduce the cost of air conditioning in the summer.

Ornamental glass

It is a glass made of clear or colored glass by passing it to the outlet of the furnace between two profiled rollers. By incorporating a wire mesh in this stage, an ornamental reinforced glass is obtained . To enhance aesthetic effects, ornamental glazing can be sandblast.

Reflective glass

The main feature of the reflective glass is its ability to reflect a large part of solar energy, thus preventing its excessive penetration into buildings. This feature has the consequence of improving the thermal comfort during the summer and reducing the energy expenditure needed for the air conditioning.